Yamaha DZR315 Kullanıcı El Kitabı - Sayfa 16

Hoparlör Sistemi Yamaha DZR315 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha DZR315 31 sayfaları. Powered loudspeakers/subwoofer
Ayrıca Yamaha DZR315 için: Kullanıcı El Kitabı (31 sayfalar), Kullanıcı El Kitabı (31 sayfalar), Kullanıcı El Kitabı (31 sayfalar)

Sayfayı Yazdır

Rotatable Horn

When shipped from the factory, the directivity of DZR(-D) series speaker in a vertical orientation is the setting which

makes the sound expand in a horizontal direction, and inhibits or narrows the sound in a vertical direction. We rec-

ommend changing the directivity by rotating the horn when you want to install the DZR(-D) series speaker horizon-

tally or when you want to use them as a floor monitor and broaden the directivity.

Using a 2.5 mm hexagonal wrench, remove all fixing screws (DZR10(-D): six total) on the grille, and remove the grille from

the speaker.

Using a No. 2 Phillips head screwdriver, remove all screws installed on the horn and pull the horn out from the speaker.

NOTE

• Make sure not to push the screws too strongly with the Phillips head screwdriver. This may cause the nuts inside the cabinet to fall off.

• If the horn cannot smoothly be pulled out, hook the notches using a flat-bladed screwdriver, and pull out.

Screws (eight total)

Notch

Rotate the horn 90 degrees, and re-install the horn to the speaker, reversing the steps above.

Vertical

Full range: DZR15(-D), DZR12(-D), and DZR10(-D)

Rotate 90°

Horizontal