Ecoplus 3170 Kullanıcı Kılavuzu - Sayfa 6
Su Pompası Ecoplus 3170 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ecoplus 3170 12 sayfaları. Fixed flow pumps
Sayfayı Yazdır
SUBMERSIBLE APPLICATIONS:
This pump is designed to operate when completely submerged in water.
CAUTION: Do not put plug and pump into water together. If plug drops into water, power supply
should be turned off to avoid electric shock. Pump can be used indoors or outdoors. Supply cord
cannot be changed or replaced. It cannot be bent or used to carry the pump. If cord is damaged, do
not use pump. Do not reach for pump while it is submerged and connected to a power supply.
Basic Setup:
1. Make sure your pump is sized correctly for the volume of water to be moved and that it can
safely and effectively operate in your system.
2. Install outflow or inflow fittings onto the pump that are appropriate for your application and that
correctly fit any tubing connected to them.
3. Connect tubing, making sure the inner diameter of the tubing matches the outside diameter
of the fittings installed.
4. Double check to make sure all fittings are secure and that the Cover is installed correctly.
6. Fill your system with water.
6. Connect the pump' s grounded power plug to a grounded electrical outlet.
EXAMPLE 1: Typical Submersible Application
Pump fully submerged between 6 inches to 3 feet below water surface and secured to bottom or
side of reservoir or tank. Pump operates with the cover installed.
To 120V AC
Power
Cord
OUTFLOW
Outflow Tubing
Outflow Fitting
Outflow Fitting Adapter
Cover
4
NOTE: Never let water
level drop below the
top of the pump.
INFLOW