Caliber MCD 165 Kullanım Kılavuzu - Sayfa 9

Araç Alıcısı Caliber MCD 165 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Caliber MCD 165 19 sayfaları. Car cd/mp3 player / rds receiver

Sayfayı Yazdır
Caliber MCD 165 Kullanım Kılavuzu

6. MENU OPERATIONS

To use this function keep press short AUDIO/MENU Button for few seconds, each time you press
this button the mode will move and the functions will shown on the display, turn the encoder volume
knob up/ down to set the desires functions ,the function states as following:
LOUD_OFF
Rotate the encoder volume knob select Loud On / Off to increase bass output, the default
is Off.
EQ_OFF
Turn the encoder volume knob to select EQ Off to step through the follwing equalizer
options:
POP -> JAZZ -> CLAS -> BEAT -> ROCK
At DSP OFF mode, EQ will be controlled by Bass/Treble setting.
BASS ( Bass level )
Turn the encoder volume knob to adjust the desired Bass level range from -10 to +10, the
default is "0".
TREBLE ( Treble level )
Turn the encoder volume knob to adjust the desired Treble level range from -10 to +10, the
default is "0".
BALANCE
Rotate the encoder volume knob to adjust the Balance between the right and left speakers
from R10 to L10, the "C00" is default.
FADER
Rotate the encoder volume knob to adjust the Fader between the front and rear speakers
from F10 to R10, the "C00" is default.
TIME SET (CLK)
The time on the clock is set to "12:00" by default, Rotate the encoder volume knob to
adjust the minutes and hours.Press AUDIO/MENU button to select the hour or minutes.
Note: Time format can not to set up, it should be follow the tunner area to change, when is
in U.S.A Latin then the time in 12H by default, when is in Europe Latin then the time in 24H
by default.
LOCAL / DISTANTCE
Rotate the encoder volume knob to select the strong local station ( Local Mode ), or
access a wider range of using distant mode ( DX ).
Programmable Turn-on Volume (P-VOL )
This option allows selection of the volume level the radio will automatically assume when
first turned on. " P - VOL 40 " is the default setting, which will turn the radio on at the volume
level selected when the unit was last turned off. To program a specific volume level for the
radio to turn on at, rotate the volume control to select "VOLUME LEVEL ". Within 5 seconds.
BEEP ON / OFF
Rotate the encoder volume knob to select Beep On / Off option.
Beep Off: disable audible beep tone when any function is accessed.
Beep On: enable audible deep tone.
16) iX-BASS BUTTON
Press the iX-BASS button to switch the loudness on or off. When Loudness is on,display will
show 'Loud On' for a few seconds.
E - 8