Yamaha VF150 Kullanıcı El Kitabı - Sayfa 20
Dıştan Takmalı Motor Yamaha VF150 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Yamaha VF150 20 sayfaları.
Sayfayı Yazdır
Specifications and requirements
Engine oil quantity (with oil filter
replacement):
4.5 L (4.76 US qt, 3.96 Imp.qt)
Lubrication system:
Wet sump
Recommended gear oil:
Yamalube Marine Gearcase Lube or
Hypoid gear oil
Recommended gear oil grade:
SAE 90 API GL-4
Gear oil quantity:
0.980 L (1.036 US qt, 0.862 Imp.qt)
Tightening torque:
Spark plug:
28 Nm (2.86 kgf-m, 20.7 ft-lb)
Propeller nut:
54 Nm (5.51 kgf-m, 39.8 ft-lb)
Engine oil drain bolt:
27 Nm (2.75 kgf-m, 19.9 ft-lb)
Engine oil filter:
18 Nm (1.84 kgf-m, 13.3 ft-lb)
EMU33554
Installation requirements
EMU40480
Boat horsepower rating
EWM01560
WARNING
Overpowering a boat can cause severe in-
stability.
Before mounting the outboard motor, check
that the horsepower of the outboard motor
does not exceed the maximum horsepower
rating on the capacity plate of the boat. If the
boat does not have a capacity plate, consult
the boat manufacturer.
14
EMU40490
Mounting outboard motor
EWM02500
WARNING
Improper mounting of the outboard mo-
●
tor could result in hazardous conditions
such as poor handling, loss of control,
or fire hazards.
Because the outboard motor is very
●
heavy, special equipment and training is
required to mount it safely.
Your dealer or other person experienced in
proper rigging should mount the outboard mo-
tor using correct equipment and complete rig-
ging instructions. For further information, see
page 46.
EMU33581
Remote control requirements
EWM01580
WARNING
If the engine starts in gear, the boat can
●
move suddenly and unexpectedly, pos-
sibly causing a collision or throwing
passengers overboard.
If the engine ever starts in gear, the
●
start-in-gear protection device is not
working correctly and you should dis-
continue using the outboard. Contact
your Yamaha dealer.
The remote control unit must be equipped
with a start-in-gear protection device(s). This
device prevents the engine from starting un-
less it is in neutral.
EMU25694
Battery requirements
EMU25714
Specifications of Battery
Use a fully charged battery that meets the fol-
lowing specifications. The engine cannot be
started if battery voltage is too low.