Directed 403.MIT3 Kurulum Kılavuzu - Sayfa 5

Otomobil Aksesuarları Directed 403.MIT3 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Directed 403.MIT3 20 sayfaları.

Pre-installation and application warnings

This section highlights important information for this specific firmware and will assist in pricing accordingly, as

START

HERE

well as bringing awareness to any operational or vehicle limitations.

Compatibilities and Requirements

T-Harness

T-Harness is not compatible.

compatible

Vehicle Takeover

Firmware notes

Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic connector.

Refer to the "Vehicle connections" following the installation diagram.

Footnotes

[1] Hood pin: The installation of an aftermarket hood pin is only required on vehicles that are not equipped with a factory

hood pin, or if not supported in data.

[2] Tach:

The tach wire is an optional connection required on some remote starters, which do not support a tach signal in D2D.

403.MIT3 2.11 2008 Mitsubishi Lancer

Refer to the Quick Reference Guide section for more details.

Keys required for

Keys required

programming

for operation