Clark Synthesis Prosound429 Kurulum Kılavuzu - Sayfa 7

Dönüştürücü Clark Synthesis Prosound429 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Clark Synthesis Prosound429 9 sayfaları.

STAGE/PLATFORM INSTALLATION

Lifting the Prosound429 up to the Hanger Bolt, place the Prosound429's brass mounting nut onto the

machine thread side of the Hanger Bolt. Insuring not to crossthread the Hanger Bolt into the brass

nut, gently turn the Prosound429 5 to 6 complete revolutions. If you feel resistance, stop immediately.

CAUTION: DO NOT OVERTIGHTEN.

Spin the Jam Nut that is still on the Hanger Bolt down to the brass nut and, using two wrenches (one

on the Jam Nut and one on the brass nut), tighten the Jam Nut against the brass nut.

CAUTION: DO NOT TIGHTEN THE JAM NUT TO THE BRASS NUT BY TURNING THE Prosound429. THIS

WILL RESULT IN SEVERE DAMAGE TO THE Prosound429 AND WILL VOID THE WARRANTY.

SURFACE MOUNT

To mount the Prosound429 directly to the surface of a stage or platform, you must first attach the

mounting bracket or install the T-nut included in the hardware package. To install the mounting

bracket, follow the instructions for this installation under the Mounting Bracket Installation section. To

install the T-nut, you will have to drill a 1/2 in. hole through the stage. From the top side, set the T-nut

with a hammer until it is flush with the stage's surface. Proceed with the installation of the threaded

stud as noted in step 2 of the Mounting Bracket Installation section (reduce the revolutions to 5 or 6,

not 8 or 9).

If possible, place the Prosound429 in the center of the area you are trying to activate (see the example

diagram below). The Prosound429 can be mounted above or below the platform, as long as the

Prosound429 is mounted horizontally (see diagrams in previous section). If the Prosound429 is

mounted above the platform, insure it is protected from being kicked or bumped by feet or other

moving objects (CAUTION: SEVERE DAMAGE MAY OCCUR IF THE Prosound429 IS KICKED).

www.clarksynthesis.com

Top View of

Possible Layout

Keyboard

Seat

T-nut installation

in platform/staging

Mount Bracket under

platform/staging

(cont.)

Prosound429