Clark Synthesis Aquasonic AQP140 Kurulum Kılavuzu

Transformatör Clark Synthesis Aquasonic AQP140 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Clark Synthesis Aquasonic AQP140 2 sayfaları.

Sayfayı Yazdır

Isolation Transformer

Installation Guide

1. Place the Isolation Transformer in a

dry, indoor, location. The transformer

is not designed to be mounted

outdoors.

4. Locate the speaker cable from the

amplifier. Remove .75 in. (20 mm) of

the cable's outer jacket.

7. Insert the positive wire (usually

white or red) to the 1+ terminal, and

the negative wire (usually black) to the

1- connection. Tighten the 1+ and 1-

screws.

2. Transformer may be mounted to

a wall using mounting tabs. (The

transformer is heavy and must be

securely mounted to the wall.)

5. Remove .3 in. (8 mm) of insulation

from each wire.

8. Push the gray ring down until it

locks on the connector's body.

3. Locate the Neutrik NL3FC Speakon

connector. Remove the connector

from the bag.

6. Place the Speakon connector's blue

bushing on the amplifier cable.

9. Screw the blue bushing onto the

connector's body. The connector is

now assembled.

303-797-7500