Directed Directechs MIT6 Kurulum Kılavuzu - Sayfa 18
Otomobil Aksesuarları Directed Directechs MIT6 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Directed Directechs MIT6 19 sayfaları.
Sayfayı Yazdır
Quick Reference Guide
Sending commands to your vehicle
Whether you want to remote start the engine, lock/unlock the doors or pop the trunk,
there are 3 possible ways you can send commands to your vehicle, using the:
•
Factory remote.
•
Aftermarket remote.
•
Directed SmartStart application via your smartphone.
If applicable, you can also start the engine remotely by pressing the Lock button 3
times quickly on your factory remote.
Vehicle takeover with regular key
Close the vehicle doors, hood and trunk, then send
1
the Remote Start command to start the vehicle.*
Send the Unlock command on the factory or
2
aftermarket remote.*
Enter the vehicle, insert your key in the ignition
3
barrel, and turn it to the ON position.
Depress the brake pedal, put the car in gear and
4
drive off.
* Icon and remote appearance may differ depending on the model purchased.
Pit stop/idle mode
Stop the vehicle in a safe parking spot and put the
1
gear in Park (P).
Press the Remote Start button on the transmitter.*
2
The parking lights will flash once to indicate the
vehicle is now in Pit Stop Mode.
Press Remote
Start button*
Press Unlock on
either remote*
Key OUT
Key IN
Key IN
&
START
START
Enter
vehicle
Ready to
drive off
Put
gear in
Park
&
Parking lights flash x1
Press Remote
Start button*
It is safe to leave the engine running and exit the
vehicle with the factory remote in hand.
3
Note: We recommend that you always lock the
doors of your vehicle when leaving it unattended.
* Icon and remote appearance may differ depending on the model purchased.
List of available commands
Note that the information below is for many Viper, Clifford, Python, Avital and
Automate models. Icons and commands may differ depending on the model and
options purchased. Refer to your authorized installation center for more specific
information.
14:36
Button(s)
Actions
Press & hold for 1 second to lock.
14:36
Press & hold for 1 second to unlock.
Press & hold for 1 second to remote start.
Key IN
*
START
START
* Press & hold for 5 seconds to activate the trunk release (optional).
* Icon and remote appearance may differ depending on the model purchased.
SmartStart compatible
This system is compatible with Directed SmartStart. For a complete list of supported
features, please visit www.mysmartstart.com.
What is SmartStart?
Now you can remote start, lock and unlock your car just by pushing a button on your
mobile device; using the SmartStart App from Directed, the leader in vehicle security
14:36
and remote start. The simple graphical interface gives you control over the following
14:36
Exit vehicle
with remote
Directed Digital Solutions MIT6
© 2019-09-11 Directed. All rights reserved.