Caliber 13579 Montaj Talimatları Kılavuzu

Otomobil Aksesuarları Caliber 13579 için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. Caliber 13579 8 sayfaları. Sled wheels
Ayrıca Caliber 13579 için: Montaj Talimatları Kılavuzu (10 sayfalar)

Sayfayı Yazdır
Caution:
• Read all instructions before assembling or using Sled Wheels. Follow the steps in order.
•
Only use Sled Wheels as intended, following all instructions contained herein for assembly and adjustment.
•
Do not exceed 12 miles per hour when driving a snowmobile with Sled Wheels.
•
The handle is a lever used to raise the skis by pushing down on it; do not lift the handle while Sled Wheels are
engaged on ski. Lift the ski loop instead, if necessary.
•
Relieve the load on the latch before releasing it by pushing the handle and ski to the ground.
•
Always use the safety pin to lock the latch in place.
•
Remove Sled Wheels from the ski when not in use.
Tools needed: Torx T-55 wrench, 5/32" Hex wrench (supplied), #2 Phillips screwdriver, ¼" or larger flat blade
screwdriver
Assembly time: about 20 minutes
Parts list:
Item
Description
1
Wheel
2
Axle bolt
3
Washer, ½"
4
Nut, ½-13
Saddle/Latch
5
assembly
6
Arm, Left
7
Arm, Right
8
Hex Wrench, 5/32
Telescoping
9
Handle
10
T-Handle
BHCS, Hex, 1/4-
11
20 x 1.5"
BHCS, Hex, 1/4-
12
20 x 0.5"
- Page 1 -
Caliber Sled Wheels Assembly
Instructions for PN 13576 and 13579
QTY
4
4
4
4
2
2
2
1
2
2
2
2
Item
Description
BHCS, Hex, 1/4-20 x
13
1.0"
14
Nut, Square, 1/4-20
15
Washer, ¼"
16
Cover, Finger, Right
17
Cover, Finger, Left
Extender, Finger,
18
Right
19
Extender, Finger, Left
Screw, Thread
20
Forming, #8-16
Safety Pin w/ lanyard
21
and Caution Card
22
Grease, 1cc
23
Vibratite, 1cc
QTY
8
12
10
2
2
1
1
4
2
1
1
CI05067, rev B