Directed Xpresskit DBALL2 Manuel - Sayfa 10

Otomobil Aksesuarları Directed Xpresskit DBALL2 için çevrimiçi göz atın veya pdf Manuel indirin. Directed Xpresskit DBALL2 14 sayfaları. Ford5 remote start ready (rsr) installation
Ayrıca Directed Xpresskit DBALL2 için: Kurulum Kılavuzu (12 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (13 sayfalar), Kurulum Kılavuzu (14 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (15 sayfalar), Kurulum ve Hızlı Referans Kılavuzu (16 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (16 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (16 sayfalar), Manuel (19 sayfalar), Kurulum Kılavuzu (11 sayfalar), Kurulum Kılavuzu (10 sayfalar)

Platform: DBALL/DBALL2

Firmware: FORD5 Range Extender Ready (RXT) Installation

LED

Description

RXT Codes

Flashes green

Start command received.

x 7

Flashes green

Stop command received.

x 8

Flashes red

Start fail.

x 5

Flashes red

Stop fail.

x 6

RFTD disabled.

Flashes red

x 7

Flashes red

OEM RS disabled.

x 8

Troubleshooting

If the bypass module fails to flash, it means the module did not

receive the signal. If using XL202, make sure the proper cable is

used. When using SmartStart make sure SmartStart is configured in

D2D

RXT start command was not executed. The module received the

command, but the car did not perform the action.

OEM Remote Start Activation was attempted while the RFTD feature

is disabled. It is activated from the Web automatically when using the

RXT flash tool or can be done manually. Refer to the Feature

Programming section for more information.

RXT start not possible when the OEM system is disabled. Refer to

the owner documentation to activate it.

Rev.: 20160317

Page 10