3Com SWITCH 4060 Hızlı Referans Kılavuzu - Sayfa 8
Ağ Donanımı 3Com SWITCH 4060 için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. 3Com SWITCH 4060 12 sayfaları. Product guide
Ayrıca 3Com SWITCH 4060 için: Veri Sayfası (6 sayfalar), Veri Sayfası (4 sayfalar), Ürün Kılavuzu (14 sayfalar)
Sayfayı Yazdır
A Quick Guide to the Command Line Interface Commands
This table describes the commands that are available in the Command Line Interface.
Command
bridge addressDatabase add
bridge addressDatabase agingTime
bridge addressDatabase find
bridge addressDatabase remove
bridge addressDatabase summary
bridge broadcastStormCont
bridge linkAggregation detail
bridge linkAggregation modify addPort
bridge linkAggregation modify linkState
bridge linkAggregation modify removePort
bridge linkAggregation summary
bridge multicastFilter igmp queryMode
bridge multicastFilter igmp snoopMode
bridge multicastFilter routerPort addPort
bridge multicastFilter routerPort autoDiscovery
bridge multicastFilter routerPort removePort
bridge multicastFilter routerPort summary
bridge port defaultPriority
bridge port detail
bridge port stpCost
bridge port stpFastStart
bridge port summary
bridge resilientLinks activePort
bridge resilientLinks create
bridge resilientLinks delete
bridge resilientLinks linkState
bridge resilientLinks summary
bridge spanningTree stpDefaultPathCosts
bridge spanningTree stpForwardDelay
bridge spanningTree stpHelloTime
bridge spanningTree stpMaxAge
bridge spanningTree stpPriority
bridge spanningTree stpState
bridge spanningTree stpVersion
bridge summary
bridge vlan create
8
What does the Command do?
Adds a statically configured address.
Sets the bridge address aging time.
Finds an address.
Removes an address.
Displays summary information on addresses.
Enables or disables broadcast storm control.
Displays detailed information on an aggregated link.
Adds a port to an aggregated link.
Enables or disables an aggregated link.
Removes a port from an aggregated link.
Displays summary information on an aggregated link.
Enables or disables IGMP query mode.
Enables or disables IGMP Multicast learning.
Adds a statically configured router port.
Enables or disables router port auto-discovery.
Removes a router port.
Displays summary information on a router port.
Sets the default 802.1D priority for untagged frames.
Displays detailed information on a port.
Sets the Spanning Tree path cost parameter.
Enables or disables Spanning Tree fast start.
Displays summary information on a port.
Sets the active resilient link port.
Creates a resilient link.
Deletes a resilient link.
Enables or disables the resilient link pair.
Displays summary information on a resilient link pair.
Sets the bridge Spanning Tree default path costs.
Sets the bridge Spanning Tree forward delay parameter.
Sets the bridge Spanning Tree hello time parameter.
Sets the bridge Spanning Tree maximum age parameter.
Sets the bridge Spanning Tree priority parameter.
Enables or disables Spanning Tree on a bridge.
Selects the version of Spanning tree to run on the bridge.
Displays bridge information for the unit.
Creates a VLAN.