ALDI GLT5529 Orijinal Kullanım Talimatları - Sayfa 5

Düzeltici ALDI GLT5529 için çevrimiçi göz atın veya pdf Orijinal Kullanım Talimatları indirin. ALDI GLT5529 12 sayfaları. Electric grass trimmer

Sayfayı Yazdır
21.
Never use your hands to try to stop the cutting unit (nylon line).
Always wait for it to stop by itself.
22.
Never use any nylon line other than the original nylon line. Under
no circumstances should you use metal wire in place of the nylon
line or replacements specifically produced for this grass trimmer.
23.
Beware of injuring yourself on the device for cutting the line
to length.
24.
Make sure that the air vents are free of dirt.
25.
Disconnect the equipment from the mains after use and check
the equipment for damage.
26.
Do not try to use the equipment to cut grass which is not
growing on the ground; for example, do not try to cut grass
growing on walls or stones, etc.
27.
The person operating the grass trimmer is liable for any damages
sustained by third parties within the equipment's working radius
as a result of its use.
28.
Do not cross roads or gravel paths with the equipment
switched on.
29.
When you are not using the equipment, keep it in a dry place out
of the reach of children.
30.
Use the equipment only in the way described in these operating
instructions and always hold it perpendicular to the ground.
Every other position is dangerous.
31.
Check at regular intervals that the screws are properly tightened.
32
The mains supply must be the same as the voltage indicated on
the rating plate.
33.
Keep extension cables away from cutting tools at all times.
34.
The power cable must be examined regularly for signs of damage
or ageing. Do not use the equipment if the power cable is in a
less than perfect condition.
AFTER SALES SUPPORT
0151 649 1500
GB
(Charged at local rates)
www.einhell.co.uk
1890 946 6244
IRE
08
MODEL NUMBER: 7446, 08/2011, GLT5529
35.
The power cables used are not to be of a lighter duty class than
light rubber-insulated HO7RN-F in accordance with DIN
57282/VDE 0282 and they must have a minimum diameter of 1.5
mm2. Plug connections must have earthing contacts and the
coupling must be protected from rainwater.
36.
If the cable is damaged during operation, disconnect it
immediately from the power supply.
Important: Do not touch the cable before it is disconnected from the
power supply.
37.
To prevent danger, damaged power cables must be replaced by
the manufacturer or by a service company authorized to carry out
the work by the manufacturer.
38.
It is recommended that equipment is only used via earth leakage
circuit breaker (RCD) with a maximum operating current of
30 mA.
39.
The area to be cut must always be kept cleared of cables and
other objects.
40.
If the equipment has to be lifted for transporting, be sure to
switch off the motor first and wait for the cutter to come to a
standstill. Each time before you leave the equipment, switch off
the motor and pull out the power plug.
41.
Before you connect the equipment to the power supply, make
sure that none of the rotating components is damaged and that
the line reel is properly inserted and secured.
42.
Under no circumstances are you to cut against hard objects
during use. This is imperative to prevent injury to yourself and
damage to the equipment.
43.
Use only original replacement parts for repairs.
44.
Repairs may only be carried out by a qualified electrician.
AFTER SALES SUPPORT
0151 649 1500
GB
(Charged at local rates)
www.einhell.co.uk
1890 946 6244
IRE
09
MODEL NUMBER: 7446, 08/2011, GLT5529