Clarke 3120161 Kullanım ve Bakım Talimatları - Sayfa 5

Elektrikli Alet Clarke 3120161 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları indirin. Clarke 3120161 9 sayfaları. Mini air blowgun

TRANSPORT & STORAGE

1. Never carry the blow gun by the air hose or with your finger on the trigger.

2. When not in use the blow gun should be disconnected from the air supply

and stored in a dry place out of the reach of children.

3. Avoid storing the tool where the temperature is below 0

Please keep these instructions in a safe place for future reference.

1. Ensure the compressor is turned

off.

2. Connect a suitable airline hose as

shown to the air inlet connector of

the mini blow gun.

3. Connect the other end of the hose

to the compressor.

4. Turn on the air supply and check

for air leaks. Rectify any found

before proceeding.

• PTFE tape may be useful for sealing threaded connections.

5. Your mini blow gun is now ready for use.

• You can fit a whip hose with a quick fit coupling if required, available

from your Clarke dealer.

Set the compressed air pressure to suit at the compressed airline regulator.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]