Clarke 40 Piece CRT 40 Kullanıcı Talimatları - Sayfa 4
Elektrikli Alet Clarke 40 Piece CRT 40 için çevrimiçi göz atın veya pdf Kullanıcı Talimatları indirin. Clarke 40 Piece CRT 40 6 sayfaları. 40 piece rotary tool kit
Sayfayı Yazdır
ELECTRICAL CONNECTIONS
This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug, for
connection to a standard, domestic electrical supply. Should the plug need changing at
any time, ensure that a plug of identical specification is used.
WARNING
This appliance is Double Insulated, and the two wires in the mains lead should
be wired in accordance with the following colour code:
BLUE
BROWN
•
Connect the BLUE coloured cord to the plug terminal marked with the letter "N"
•
Connect the BROWN coloured cord to the plug terminal marked with the letter "L"
If this appliance is fitted with a plug which is moulded on to the electric cable (i.e. non-
rewireable) please note:
1. The plug must be thrown away if it is cut from the
electric cable. There is a danger of electric shock
if it is subsequently inserted into a socket outlet.
2. Never use the plug without the fuse cover fitted.
3. Should you wish to replace a detachable fuse
carrier, ensure that the correct replacement is
used (as indicated by marking or colour code).
4. Replacement fuse covers can be obtained from
your local Clarke dealer or most electrical stockists.
FUSE RATING
The fuse in the plug must be replaced with one of the same rating (5 amps) and this
replacement must be ASTA approved to BS1362.
If in doubt, consult a qualified electrician. Do not attempt any electrical repairs yourself.
CABLE EXTENSION.
Always use an approved cable extension suitable for the power rating of this tool (see
specifications), the conductor size should also be at least the same size as that on the
machine, or larger. When using a cable reel, always unwind the cable completely.
-
NEUTRAL
-
LIVE
4
VARIABLE SPEED CHART
Speed Indicator
Position
1
2
3
4
5
6
MAINTENANCE
ALWAYS unplug the tool from the mains supply and ensure it is swtched OFF when
performing maintenance tasks.
The tool should be kept clean at all times, Ensure the ventilation ducts are clear,
and the power cable is in good condition. Get into the habit of cleaning thoroughly
after each use and before storing.
Never clean with solvents, use a moist cloth with soapy water if necessary.
The tool does not require lubrication.
ACCESSORIES
A 100 piece Accessory Kit is available from your Clarke dealer.
Please quote Part Number 6468025
RPM
17,500
18,500
24,500
27,800
31,000
33,500
9