Clarke 7614051 Kullanım ve Bakım Talimatları - Sayfa 8
Elektrikli Alet Clarke 7614051 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları indirin. Clarke 7614051 12 sayfaları. 15 tonne shop press
Sayfayı Yazdır
MAINTENANCE
A visual inspection must be made before using the press. Check for leaking
hydraulic fluid, and damaged, loose or missing parts.
Please be aware that repair of this equipment may require specialised
knowledge and facilities. It is recommended that a thorough annual inspection
of the press be made and that any defective parts, decals or warning labels be
replaced with genuine Clarke parts.
Any press which appears to be damaged in any way, is found to be badly
worn, or operates abnormally SHOULD BE REMOVED FROM SERVICE until
necessary repairs are made.
• Keep the press clean by wiping with a clean soft cloth.
• Periodically check the frame to make sure all bolts are tight and inspect
for cracked welds, loose or missing parts.
• Periodically check the hydraulic connections for possible leaks. Replace
damaged or leaking hydraulic components before use.
• Periodically apply a light smear of oil to the moving parts and the work
bed support pins.
• At 6 monthly intervals, check the hydraulic pump oil level, by removing
the Oil Filler Plug, on top of the pump assembly. Oil should be level with
the bottom of the hole. If necessary top up with CLARKE Hydraulic Oil,
Part No. 3050830 only.
This operation is carried out with the ram fully retracted.
• Replace the Hydraulic oil every 2 years. This operation requires the
dismantling of the hydraulic system, for which you should consult your
CLARKE dealer.
8