ALDI MA 501-17 Kullanıcı Kılavuzu - Sayfa 15
Kağıt Öğütücü ALDI MA 501-17 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ALDI MA 501-17 19 sayfaları. Strip cut paper shredder
Sayfayı Yazdır
3. Place the slide switch at OFF if you no longer need the paper shredder.
The LED ready indicator goes out.
4. Disconnect the power plug
There is a paper sensor
paper
the paper shredder. For this reason, always push smaller paper for-
mats into the centre of the slot.
Using the REV setting
Use the REV setting to put the cutters into reverse operating direction.
1. Move the slide switch
The cutters run in reverse and move the fed paper back out of the shredder.
2. Take the paper out of the shredder in order to continue with the shredding
process (see "paper jam" in the fault table).
Cleaning
NOTICE!
Risk of short circuit!
Water that has penetrated the housing may cause a short circuit.
− Disconnect the power plug before cleaning.
− Never submerge the paper shredder in water.
− Make sure that no water penetrates the housing.
NOTICE!
Risk of damage!
Improper handling of the paper shredder may result in damage to
the paper shredder.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, sharp or metallic cleaning utensils such as
knives, metal sponges and the like. They could damage the
surfaces.
1
and empty the waste bin.
3
. It detects the paper inserted and activates the cutters in
2
5
to the REV position.
in the centre of the feed-in slot for
Cleaning
15