Directed Directechs DB3 Kurulum Kılavuzu - Sayfa 19

Uzaktan Çalıştırıcı Directed Directechs DB3 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Directed Directechs DB3 20 sayfaları. Smart key for 2013 toyota highlander
Ayrıca Directed Directechs DB3 için: Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (19 sayfalar), Manuel (6 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (10 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (10 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (18 sayfalar), Kurulum Kılavuzu (19 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (17 sayfalar), Kurulum Kılavuzu (20 sayfalar), Kurulum Kılavuzu (18 sayfalar)

Sayfayı Yazdır
Directed Directechs DB3 Kurulum Kılavuzu

Quick Reference Guide (customer copy)

Sending commands to your vehicle
Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there are
3 possible ways you can send commands to your vehicle, using the:
• Factory remote.
• Aftermarket remote.
• Directed SmartStart application via your smartphone.
If applicable, you can also start the engine remotely by pressing the Lock button 3 times quickly
on your factory remote.
Vehicle takeover with regular key
Close the vehicle doors, hood and trunk, then send the
1
Remote Start command to start the vehicle.*
Send the Unlock command on the factory or aftermarket
2
remote.*
Enter the vehicle, insert your key in the ignition barrel, and
3
turn it to the ON position.
Depress the brake pedal, put the car in gear and drive
4
off.
* Icon and remote appearance may differ depending on the model purchased.
19
403.SUBARU1 1.38 2008 Subaru Impreza
©2023 Directed. All rights reserved.
Press Remote
Start button*
Press Unlock on
either remote*
Key OUT
Key IN
Key IN
&
START
START
Enter
vehicle
Ready
to drive
off
Pit stop/idle mode
Stop the vehicle in a safe parking spot and put the gear in
1
Park (P).
Press the Remote Start button on the transmitter.*
2
The parking lights will flash once to indicate the vehicle is
now in Pit Stop Mode.
It is safe to leave the engine running and exit the vehicle
with the factory remote in hand.
3
Note: We recommend that you always lock the doors of
your vehicle when leaving it unattended.
14:36
* Icon and remote appearance may differ depending on the model purchased.
List of available commands
14:36
Note that the information below is for many Viper, Clifford, Python, Avital, Automate, Autostart
Key IN
and AstroStart models. Icons and commands may differ depending on the model and options
START
START
purchased. Refer to your authorized installation center for more specific information.
Button(s)
Actions
Press & hold for 1 second to lock.
Press & hold for 1 second to unlock.
Press & hold for 1 second to remote start.
*
* Press & hold for 5 seconds to activate the trunk release (optional).
* Icon and remote appearance may differ depending on the model purchased.
Put
gear in Park
14
&
Parking lights
Press
flash x1
Remote
Start
button*
14:36
Exit
vehicle
with
remote