ALDI 54731 Kullanıcı Kılavuzu - Sayfa 15
Matkap ALDI 54731 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ALDI 54731 16 sayfaları. 24v lithium-ion cordless drill with hammer action & 2 x batteries
Trouble Shooting
How do I select hammer function?
Rotate the function selection collar (3) until the Hammer symbol aligns with the triangular
indicator.
How do I select drill function (Non Hammer)?
When using the drilling function the torque control has no effect to the output of the
drill. The drill function (15) is used when using the drill to drill holes in metal, non ferrous
material, wood, plastic and similar materials. Rotate the function selection collar (3) so
the symbol of the drill bit (15) aligns with the triangular indicator on the top of the drill
housing.
How do I select screw / driver function?
Rotate the function selection collar (3) so to align the screw symbol (14) with the triangular
indicator on the top of the drill housing. To adjust the torque setting, rotate the torque
setting collar (2). The higher the number, the higher the output torque. Align the required
torque setting number with the triangular indicator on the top of the drill.
Torque setting is 11.
What is the function of the Forward / Reverse switch?
This switch (6) will allow you to change the direction of the motor while the trigger switch
is not depressed.
Drill/driving uses the forward mode. The reverse mode is intended for the removal of
screws and assisting to remove jammed drill/driver bits.
What do I do if I have an issue with my drill?
If you have any issues with your drill/driver, please contact our Customer Service line on
1800 909 909.
26
e-mail: [email protected]
MODEL: №. 2024001 • 02/2017 • 55945
24v Lithium-ion Cordless Drill with Hammer Action
AFTER SALES SUPPORT
1800 909 909
(toll free)
24v Lithium-ion Cordless Drill with Hammer Action
Specifications
Motor:
24 V
n
Low speed:
0 -Lo = 0 – 400 min-
n
High speed:
0 -Hi = 0 – 1550 min-
Impact Frequency:
0-6,000 / 0-22,500 BPM
Drill/driver diam Ø:
- Wood 30 mm
- Steel 13 mm
- Non aggregate materials 13mm
Chuck:
13 mm Keyless
Battery 2024001-BAT:
24 V
1.5Ah/Li-Ion
Charger Adaptor:
Model: 2024001-CBA
Input: 100-240V~ 50-60Hz 0.5A
Output: 26.0 V
Plug Pack Charger:
Model#: IVP 2600-0450WS
Charging time:
Ready for use in 3-5 Hours
Product Dimensions:
220mm x 225mm x 75mm (L x W x H)
(Drill/driver with battery pack fitted)
Your 24V Lithium-Ion Drill with Hammer Function product complies
with the following Standards:
Certification
Standard
CE-MD&GS
EN 60745-1:2009+A11:2010;
EN 60745-2-1:2010
CE-EMC (Machine)
EN 55014-1:2006+A1+A2,
EN 55014-2:2015
CE-EMC
EN 55014-1:2006+A1+A2,
(Battery pack & Charger) EN 55014-2:2015,
EN 61000-3-2:2014,
EN 61000-3-3:2013
Variance
AS/NZS 60745.1:2009;
AS/NZS 60745.2.1:2009
AS/NZS 60745.2.2:2009
Charger:
Safety Report/s:
AS/NZS 60335.2.29 :2009 Inc A1-2
Certification SAA-141627-EA
EMC EN55014-1+A1:2009+A2:2011
Meps AS/NZS4665.1:2005+A1:2009
AFTER SALES SUPPORT
1800 909 909
(toll free)
Specifications
1
1
, 0.45A
Directive
Directive 2006/42/EC
EN60745-2-2:2010
Directive 2014/30/EU
Directive 2014/30/EU
e-mail: [email protected]
MODEL: №.2024001 • 02/2017 • 55945
27