Clarke CCRT266 Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 7
Elektrikli Alet Clarke CCRT266 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke CCRT266 17 sayfaları. Cordless rotary tool kit
Sayfayı Yazdır
THE BATTERY
NOTES ON CHARGING
• During use, the battery pack may become warm. Allow it to cool before
recharging.
• Never store the battery pack when it is discharged, recharge it fully before
storage.
TO REMOVE THE BATTERY
• Press either side of the battery
and pull it out of the rotary tool.
TO CHARGE THE BATTERY
1. Slide it into the charger unit.
• Make sure that the battery is fully
inserted.
• The red LED will light to show that
the battery is charging.
2. When the battery has been fully
charged, the red LED will extinguish
and the green LED will light.
• The charger will continue to deliver
a slow charge to maintain the battery until the charger is disconnected from the
mains supply.
• Whilst charging, the battery pack and charger may become warm. This is
normal and should be expected.
3. When charging is complete, remove the battery from the charger and disconnect
the charger from the mains supply.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7