ALE TC Series Operatör El Kitabı - Sayfa 16

Yazıcı ALE TC Series için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. ALE TC Series 18 sayfaları.

2.3

To enable the prime switch

you can use the prime switch (see Fig. 1)to prime the print-head instead of using the

controller keyboard. This can be useful if the print-head is too far away from the controller.

To enable the prime switch to work at ANY time:

Press and hold the switch. Wait. LCD will show "ENABLE REMOTE PRIME SWITCH?". Keep

switch pressed and press OK from keypad.

Once the prime switch is activated, you can use it to prime the system or do a test print.

To prime using the prime switch: on the controller keypad press the "prime" key

you press the switch once, you will get a "norm" prime.

To print a "test patch" (all nozzles, Fig. 18) press and hold the switch for a longer time.

TC series print-heads Operator Manual

Design • Print • Trace

07/07/2011

. If