Clarke STRONG-ARM CSA10BB Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 7
Elektrikli Alet Clarke STRONG-ARM CSA10BB için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke STRONG-ARM CSA10BB 17 sayfaları. 10 tonne hydraulic bench press
Sayfayı Yazdır
FITTING THE MANDRELS OR PRESSURE CAP
Mandrels are available as an
adaptor kit, any of which may be
connected to the end of the ram
using the adaptor.
Alternatively, the basic ram pressure
cap can be fitted as shown. Secure
the pressure cap by tightening the
grub screw with a suitable hex key.
If one of the mandrels is required, the
adaptor must be fitted instead of the
pressure cap. Secure the adaptor by
tightening the grub screw with a
suitable hex key.
Select your mandrel depending
upon the size of the workpiece
bearing surface.
The mandrel can then be pushed
into the adaptor where the built-in
spring clip will hold it in place.
Store the mandrels in their positions
on the mounting bracket when not in
use.
7
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]