Zanussi ZBB27650SA Kullanıcı Kılavuzu - Sayfa 15

Buzdolabı Zanussi ZBB27650SA için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZBB27650SA 20 sayfaları.

Sayfayı Yazdır

Fix the appliance

to the side of the

kitchen unit, fit the

bracket (E) and (F),

adjust the distance,

and fix using the

screws (as in figure).

Fit the cover (D).

~50 mm

21 mm

~50 mm

21 mm

Install the part

(Ha) on the inner side

of the kitchen furni-

ture.

8 mm

Open the appli-

ance door and the

kitchen furniture door

at an angle of 90°.

Insert the small

square (Hb) into

guide (Ha).

Put together the ap-

pliance door and the

furniture door and

mark the holes.

www.zanussi.com

Disconnect the

parts (Ha), (Hb), (Hc)

and (Hd).

Push the part (Hc)

on the part (Ha).

8 mm

Remove the brack-

ets and mark a dis-

tance of 8 mm from

the outer edge of the

door where the nail

must be fitted (K).

Place the small

square on the guide

again and fix it with

the screws supplied.

Align the kitchen fur-

niture door and the

appliance door by ad-

justing the part Hb.

Do a final check to make sure that:

• All screws are tightened.

• The magnetic sealing strip is attached tightly

to the cabinet.

Important! If the ambient temperature is low

(for example, in the Winter), the size of the

gasket decreases. The size of the gasket

increases when the ambient temperature

increases.

Press the part

(Hd) on the part (Hb).