Zanussi ZD 16/5 R Talimat Kitapçığı - Sayfa 11

Buzdolabı Zanussi ZD 16/5 R için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Zanussi ZD 16/5 R 11 sayfaları. Fridge-freezer zd 16/5 r

Door reversibility

Unplug the appliance from the power supply before

carrying out the below-mentioned operations.

1. Remove the lower hinge (3), the pin (1) and the

support foot (2).

2. Unscrew the front left support foot and screw it

into the corresponding position on the opposite

side.

3. Unscrew the two screws which hide the fixing

holes of the hinge on the left-hand side.

4. Detach the lower door from the central hinge (H).

5. Remove the central hinge and detach the upper

door from the pin (G). Unscrew the pin (G) and

screw it into the corresponding position on the

opposite side.

6. Remove the two plugs, and remount them on the

other side.

7. Re-assemble the upper door, the central hinge

and the lower door.

8. Re-assemble the lower hinge (turning it 180¡),

the pin (1) and the support foot (2) on the

opposite side.

To line up the doors, it is possible to adjust the

middle hinge (H) horizontally by means of a tool,

after slackening the two screws (see figure).

Warning:

After having reversed the opening direction of

the doors check that all the screws are properly

tightened and that the magnetic seal adheres to

the cabinet. If the ambient temperature is cold

(i.e. in Winter), the gasket may not fit perfectly to

the cabinet. In that case, wait for the natural

fitting of the gasket or accelerate this process by

heating up the part involved with a normal

hairdrier.

D249