Clarke Woodworker 6462030 Kullanım ve Bakım Talimatları - Sayfa 3
Elektrikli Alet Clarke Woodworker 6462030 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları indirin. Clarke Woodworker 6462030 6 sayfaları. Variable speed jigsaw
Sayfayı Yazdır
Vibration Emissions
HAND-ARM VIBRATION
Employers are advised to refer to the HSE publication "Guide for Employers".
All hand held power tools vibrate to some extent, and this vibration is transmitted to the
operator via the handle, or hand used to steady the tool. Vibration from about 2 to 1500
herz is potentially damaging and is most hazardous in the range from about 5 to 20
herz.
Operators who are regularly exposed to vibration may suffer from Hand Arm Vibration
Syndrome (HAVS), which includes 'dead hand', 'dead finger', and 'white finger'. These
are painful conditions and are widespread in industries where vibrating tools are used.
The health risk depends upon the vibration level and the length of time of exposure to
it......in effect, a daily vibration dose.
Tools are tested using specialised equipment, to approximate the vibration level
generated under normal, acceptable operating conditions for the tool in question. For
example, a grinder used at 45° on mild steel plate, or a sander on softwood in a horizontal
plane etc.
These tests produce a value'a', expressed in metres per second per second, which
represents the average vibration level of all tests taken, in three axes where necessary,
and a second figure 'K', which represents the uncertainty factor, i.e. a value in excess
of 'a', to which the tool could vibrate under normal conditions. These values appear in
the specification panel below.
MODEL No:
CJS2
DESCRIPTION:
JIG SAW
Declared vibration emission value in accordance
with EN12096
Measured vibration emission value - a:
Uncertainty value - K:
Highest measured reading in a single plane
Values determined according to EN28622-1
-9-
2
6.3m/s
2.5m/s
2
m/s
2
Safety Precautions
WARNING:
As with all machinery, there are certain hazards involved with their operation
and use. Exercising respect and caution will considerably lessen the risk of
personal injury. However, if normal safety precautions are overlooked or
ignored, personal injury to the operator or damage to property, may result.
1. ALWAYS Learn the machines' applications, limitations and the specific potential
hazards peculiar to it. Read and become familiar with the entire
operating manual.
2. ALWAYS use a face or dust mask if operation is particularly dusty.
3. ALWAYS check for damage. Before using the machine, any damaged
part, should be checked to ensure that it will operate properly, and
perform its intended function.
Check for alignment of moving parts, breakage of parts, mountings,
and any other condition that may affect the machines' operation.
Any damage should be properly repaired or the part replaced. If in doubt, DO NOT
use the machine. Consult your local dealer.
4. ALWAYS disconnect the tool/machine from the power supply before servicing and
when changing accessories.
5. ALWAYS wear safety goggles, manufactured to the latest European Safety Standards.
Everyday eyeglasses do not have impact resistant lenses, they are not safety glasses.
6. ALWAYS keep work area clean. Cluttered areas and
benches invite accidents.
7. ALWAYS ensure that adequate lighting is available. A
minimum intensity of 300 lux should be provided. Ensure
that lighting is placed so that you will not be working in your
own shadow.
8. ALWAYS keep children away. All visitors should be kept a safe distance from the work
area, especially whilst operating the machine.
9. ALWAYS maintain machine in top condition. Keep tools/ machines
clean for the best and safest performance. Follow maintenance
instructions.
10. ALWAYS handle with extreme care do not carry the tool/machine
by its' electric cable, or yank the cable to disconnect it from the
power supply .
11. ALWAYS ensure the switch is off before plugging in to mains. Avoid accidental starting.
12. ALWAYS concentrate on the job in hand, no matter how trivial it may seem.
Be aware that accidents are caused by carelessness due to familiarity.
13. ALWAYS keep your proper footing and balance at all
times don't overreach. For best footing, wear rubber
soled footwear. keep floor clear of oil, scrap wood, etc.
-2-