Zanussi ZI 729 DAC Talimat Kitapçığı - Sayfa 7

Buzdolabı Zanussi ZI 729 DAC için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Zanussi ZI 729 DAC 12 sayfaları.

Open both the appliance door and that of the

Fig. 9

kitchen unit to approx. 90°. Place the little plates

8mm

over the runners. Hold the doors of the appliance

and the unit together and mark the holes.

PR34

Remove the little plates and make the holes with a

diam. of 2 mm. Replace the little platee over the

Fig. 10

runners and screw in the screws provided (3.5x16

mm).

For the alignment of the kitchen unit door, if

necessary, use the clearance size of the slotted

holes. At the end of the procedure, check that the

doors of the appliance and the kitchen unit open

properly.

PR35

If the appliance is fixed to the side of the kitchen

Fig. 11

unit, simply slacken the screws in the fixing

brackets (G), move the brackets as shown in the

figure and re-tighten the screws.

D735

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond

to your domestic power supply. Voltage can vary by ±6% of the rated voltage. For operation with

different voltages, a suitably sized auto-transformer must be used.

TECHNICAL SPECIFICATIONS

The technical data is indicated in the rating plate on the left side inside the appliance.