Zanussi ZI 922/9 K Talimat Kitapçığı - Sayfa 16

Buzdolabı Zanussi ZI 922/9 K için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Zanussi ZI 922/9 K 17 sayfaları.

Open the appliance door and the furniture door at

90°. Insert the small square (B) into guide (A). Put

together the appliance door and the furniture door

and mark the holes as indicated in the figure.

Remove the squares and drill holes with ø 2 mm at

8 mm from the outer edge of the door. Place the

small square on the guide again and fix it with the

screws supplied.

Should the lining up of the furniture door be

necessary, use the clearance of slots.

At the end of operations, it is necessary to check if

the door of the furniture closes properly.

Fix cover (D) on guide (B) until it clips into place.

If the appliance is fixed to the side of the kitchen

unit, simply slacken the screws in the fixing brackets

(E), move the brackets as shown in the figure and

re-tighten the screws.

8mm

PR167

PR168

PR167/1

D735