Zanussi ZNHN18FS1 Kullanım Kılavuzu - Sayfa 16

Buzdolabı Zanussi ZNHN18FS1 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Zanussi ZNHN18FS1 21 sayfaları.
Ayrıca Zanussi ZNHN18FS1 için: Hızlı Başlangıç Kılavuzu (12 sayfalar)

Sayfayı Yazdır

Problem

Temperature setting LEDs ﬂash

at the same time.

If the advice does not lead to the

desired result, call the nearest

Authorized Service Centre.

REPLACING THE LAMP

The appliance is equipped with a longlife LED

interior light.

Only service is allowed to replace the lighting

device. Contact your Authorised Service Centre.

Possible cause

The food products' tempera-

ture is too high.

Many food products are stored

at the same time.

The door has been opened of-

ten.

The FastFreeze function is

switched on.

There is no cold air circulation

in the appliance.

An error has occurred in meas-

uring the temperature.

CLOSING THE DOOR

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

installation instructions.

3. If necessary, replace the defective door

gaskets. Contact the Authorised Service

Centre.

Solution

Let the food products temper-

ature decrease to room tem-

perature before storage.

Store less food products at the

same time.

Open the door only if necessa-

ry.

Refer to "FastFreeze function"

section.

Make sure that there is cold air

circulation in the appliance.

Refer to "Hints and Tips" chap-

ter.

Contact the nearest Author-

ised Service Centre. The cool-

ing system will continue to

keep food products cold, but

temperature adjustment will

not be possible.