Zanussi ZRX51100WA Kullanıcı Kılavuzu - Sayfa 20

Buzdolabı Zanussi ZRX51100WA için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZRX51100WA 42 sayfaları.
Ayrıca Zanussi ZRX51100WA için: Kullanıcı Kılavuzu (44 sayfalar)

Sayfayı Yazdır

1. Technische Informatie

Ideally, however, the appliance should not

be positioned below overhanging wall units.

Accurate levelling is ensured by one or more

adjustable feet at the base of the cabinet.

It is advisable for there to be 75mm separat-

ing the back of the fridge to the wall, at least

100mm of space at its two sides, height of

over 100mm from its top and a clear space

upfront to allow the doors to open 160°

Door reversibility

WARNING!

Before carrying out any operations,

remove the plug from the power socket.

CAUTION!

To carry out the following operations,

we suggest that this be made with

another

person that will keep a firm hold on the

doors of the appliance during the

operations.

1. Remove the top hinge cover.

2. Unscrew the 2 retaining screws, and

remove the hinge from the appliance.

3. Take the door off.

4. Unscrew the two screws fixing the lower

door hinge (there is a foot fixing on the

hinge, do not remove it from the hinge).

Take the door off.

5. Then remove the left foot as shown in the

figure.

6. Fix the door hinge (with the original foot

on it) on the opposite side and then the

loosened foot at the former place as

shown in the figure.

Make sure to place the screws in the right

holes as shown in the figure.The edge of

the hinge is parallel with the side of the

cabinet.

Please make sure to place the lower

foot below the door hinge. The lower

foot is recognizable by its 4 ribs on the

outer surface.

7. Fix the door onto the lower hinge pin.

8. To fit top door hinge, remove the plastic

screw hole cover carefully, and refit them

in the holes left by the hinge retaining

screws.

9. Refit the top hinge using the 2 retaining

screws, making sure that the edge of

the door is parallel with the side of the

cabinet.

10. Replace the hinge cover.

11. Relocate the handle and the plastic plugs

to the opposite side.

WARNING!

Reposition, level the appliance, wait for

at least four hours and then connect it

to the power socket.