Zanussi ZT 30 SS Talimat Kitapçığı - Sayfa 17

Buzdolabı Zanussi ZT 30 SS için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Zanussi ZT 30 SS 18 sayfaları.

Sayfayı Yazdır

ELECTRICAL CONNECTION

WARNING:

THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability

should this safety measure not be

observed.

If the plug that is fitted to your appliance is not suit-

able for your socket outlet, it must be cut off and the

appropriate plug fitted.

Remove the fuse from the cut off plug.

The cut off plug should then be disposed of to pre-

vent the hazard of shocks in case it should be

plugged into a 13amp socket in another part of your

home.

Important

The wires in the mains lead are coloured in

accordance with the following code:

Green and Yellow

Blue

Brown

If you fit your own plug, the colours of the wires in

the mains lead of your appliance, may not corre-

spond with the markings identifying the terminals in

your plug, proceed as follows:

Connect the Green and the Yellow (earth) wire to the

terminal in the plug which is marked with the letter

«E» or the earth symbol

yellow.

Connect the blue (neutral) wire to the terminal in the

plug which is marked with the letter «N» or coloured

black.

Connect the brown (live) wire to the terminal in the

plug which is marked with the letter «L» or coloured

red.

The plug moulded onto the lead incorporates a fuse.

For replacement, use a 13amp BS1362 fuse. Only

ASTA or BSI approved fuses should be used.

The plug must not be used if the fuse cover/carrier is

lost. The cover/carrier is indicated by the coloured

insert at the base of the plug.

A replacement cover/carrier must be obtained from

your local Zanussi Service Force Centre whose

address is listed in the Customer Care Booklet which

accompanies your instruction manual.

- Earth

- Neutral

- Live

, or coloured green and

This appliance complies with the E.E.C. Directive

No. 87/308 of 2.6.87 relative to radio interference

suppression.

This appliance complies with the following

E.E.C. Directive:

- 73/23 EEC of 19.2.73 (Low Voltage Directive)

and subsequent amendments.

- 89/336 EEC of 3.5.89 (Electromagnetic

- Compatibility Directive) and subsequent amend-

ments.

Please ensure that when the appliance is

installed it is easily accessible for the engineer

in the event of breakdown.

GREEN & YELLOW

BLUE

D207

13 AMP. FUSE

BROWN

CORD CLAMP