Zanussi ZOHNX3W1 Kullanıcı Kılavuzu - Sayfa 23

Fırın Zanussi ZOHNX3W1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZOHNX3W1 29 sayfaları.
Ayrıca Zanussi ZOHNX3W1 için: Kullanıcı Kılavuzu (29 sayfalar)

Sayfayı Yazdır

Step 8

Clean the glass panels with water and

soap. Dry the glass panels carefully. Do

not clean the glass panels in the dish-

washer.

Step 9

After cleaning, install the glass panel

and the oven door.

The screen-printing zone must face the inner

side of the door. Make sure that after the instal-

lation the surface of the glass panel frame on

the screen-printing zones is not rough when

you touch it.

When installed correctly the door trim clicks.

Make sure that you install the internal glass

panel in the seats correctly.

HOW TO REPLACE: LAMP

WARNING! Risk of electric shock.

The lamp can be hot.

Step 1

Turn off the oven. Wait until the

oven is cold.

Back lamp

Step 1

Turn the glass cover to remove it.

Step 2

Clean the glass cover.

Step 3

Replace the lamp with a suitable 300 °C heat-resistant lamp.

Step 4

Install the glass cover.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.

WHAT TO DO IF...

In any cases not included in this table please

contact with an Authorised Service Centre.

Always hold the halogen lamp with a cloth to

prevent grease residue from burning on the lamp.

Before you replace the lamp:

Step 2

Disconnect the oven from the

mains.

Put a cloth on the bottom of

Problem

The oven does not

heat up.

Step 3

the cavity.

Check if...

The fuse is blown.