Zanussi AquaCycle 1000 Talimat Kitapçığı - Sayfa 19

Yıkayıcı Zanussi AquaCycle 1000 için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Zanussi AquaCycle 1000 20 sayfaları. Washing machine f1000

Sayfayı Yazdır

Problem

• Spinning starts late or the laundry is

not spun enough:

• No water is visible in the drum

• The machine makes an unusual noise

If you are unable to identify or solve the problem,

contact your nearest service centre (see below).

Before telephoning, make a note of the model, serial

number and purchase date of your machine: the

Service Centre will require this information.

Electric Blue Service & Installations P/L

324 Frankston Dandenong Rd,

Dandenong. VIC 3175

Phone: 1300 654 488

Possible cause

• The electronic unbalance detection device has cut

in because the laundry is not evenly distributed in

the drum. The laundry is redistributed by reverse

rotation of the drum. This may happen several

times before the unbalance disappears and normal

spinning can resume. If, after 20 minutes, the

laundry is still not evenly distributed in the drum,

the machine will not spin. If at the end of the

programme the laundry is not spun enough,

redistribute the load manually and select the spin

programme.

• Machines based on modern technology operate

very economically using very little water without

affecting performance.

• The machine is fitted with a type of motor which

makes an unusual noise compared with other

traditional motors. This new motor ensures a softer

start and more even distribution of the laundry in

the drum when spinning, as well as increased

stability of the machine.

Mod. ..........

Prod. No. ...........

Ser. No. .........