Zanussi FAE1025V Kullanıcı El Kitabı - Sayfa 11
Yıkayıcı Zanussi FAE1025V için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Zanussi FAE1025V 48 sayfaları. Zanussi washing machine
Ayrıca Zanussi FAE1025V için: Kullanıcı Kılavuzu (27 sayfalar), Kullanıcı Kılavuzu (4 sayfalar)
Sayfayı Yazdır
7. Programme progress display
The light
PREWASH / WASH will illuminate
to indicate that the washing machine is on prewash
or wash phase.
The light
RINSE will illuminate to indicate that
the washing machine is on rinse phase.
The light
SPIN will illuminate to indicate that the
washing machine is on spin phase.
The light
DRAIN will illuminate to indicate that
the washing machine is on drain phase.
The light
END will illuminate to indicate that the
selected programme has finished.
The light
END flashes in the event of operating
problems:
• 4 flashes: door open.
• 2 flashes: problem with water draining.
• 1 flash: problem with water supply.
For more information see paragraph "Something not
working?" at the end of this booklet.
8. Spin speed selector dial or
NO SPIN option
This dial allows the reduction of the final and the
intermediate spin speed or to select
option.
The speeds on the dial refer to cotton programmes.
Position 1000 r.p.m. corresponds to 900 r.p.m. for
synthetics and 700 for wool and delicates.
•
NO SPIN: by selecting this option all the
spinning phases are turned off. To be used for
extremely delicate items.
9. Programme selector dial
The selector dial can be turned either clockwise or
counter-clockwise.
Use this selector dial to select the required
programme.
At the end of each programme the selector dial
must be turned to position "
machine.
ATTENTION!
If the programme selector dial is turned to another
position (programme) when the machine is working,
the lights of the programme progress display start to
flash. The machine will not perform the new selected
programme, but it will continue running on the same
cycle.
NO SPIN
11
O
", to switch off the