Zanussi FE 925N Kullanıcı Kılavuzu - Sayfa 15
Yıkayıcı Zanussi FE 925N için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi FE 925N 21 sayfaları. Washing machine fe 925n; fe 1024 n
Sayfayı Yazdır
132992210.qxd
4/7/03
10:29 AM
7. Select the spin speed
RINSE HOLD option
Press the SPIN SPEED button
order to select the desired spin speed or the RINSE
HOLD option
. The relevant light will light up.
If you select the RINSE HOLD option, the machine
will stop at the end of the programme with the water
still in the tub.
FE 1024 N
8. Select the desired options
If your laundry is very dirty, it may be advisable to
select the PREWASH option
If you wish the laundry to undergo an extra rinse,
select the SUPER RINSE option
Press the OPTIONS button so as to cause one or
both of the lights to light up.
Select the QUICK WASH option
is only slightly soiled. The relevant light illuminates.
Pagina
15
(Nero/Process Black pellicola)
or the
repeatedly, in
FE 925 N
.
.
, if your laundry
15
9. Start the programme
Press the START/PAUSE button
light will stop flashing, the DOOR LOCKED light will
light up, and only the light relevant to the phase that
is in progress will remain lit.
10. How to change a programme
during its cycle
Before you make any change, you must pause the
washing machine by pressing the START/PAUSE
button.
It is possible to change any phase before the
programme carries it out.
Changing the type of fabric or temperature is
possible, obviously, only during the washing phase.
When you make a change in these two parameters,
the washing machine will resume the cycle from the
beginning.
If it is necessary to drain the water in order to
change the programme in progress, proceed as
follows:
• PAUSE the machine by pressing the
START/PAUSE button;
• press the RESET button
only the DRAIN light
remains lit;
• press the START/PAUSE button again.
When the water has been drained, you may select a
new programme and press the START/PAUSE
button to start it.
. The relevant
repeatedly, until