Zanussi FJ 1033 Kullanıcı Kılavuzu - Sayfa 12

Yıkayıcı Zanussi FJ 1033 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi FJ 1033 37 sayfaları. Electrolux washing machine instruction booklet
Ayrıca Zanussi FJ 1033 için: Talimat Kitapçığı (36 sayfalar)

Sayfayı Yazdır
HOW AND WHEN TO USE THE CONTROLS
START
After loading the laundry,
place the washing powder and
additives into the appropriate
compartments. Before starting
up the machine, check that:
— the appliance is plugged in
— the water supply taps are
turned on
— the drain hose is correctly
and securely positioned
— the door and the washing
powder dispenser drawer are
closed.
Depress
the
required,
pushbutton(s).
Select
the
required
programme by pressing and
turning the programme dial
clockwise.
At this stage, press the
«start/stop» button to start
the programme up.
The pilot light comes on
and the programme starts up.
STOP
When the programme has
finished, the programme dial
will be in the «l» position and
the washing machine will
automatically stop.
If you have depressed the
«Rinse Hold» button, the water
remaining in the wash tub must
be drained by pressing again the
same button before opening the
door.
Open the door only at the
end of the programme when
the pilot light beside the door
catch goes out.
If necessary,
stop the
machine by pressing the
«start/stop» button ® again.
At
the
end
of
the
programme, all the buttons
should be reset to the «rest»
position (not depressed).
THE WASHING
PROGRAMMES
This washing machine
incorporates the «Jet System»
washing for a rapid and
economical wash, since the
machine
uses
only
the
amount of water necessary to
wash each load. This allows
substantial
savings
of
electricity,
detergent and
time, ensuring at the same
time
optimum
washing
results for all types of fabrics.
The
following
pages
illustrating all the pro¬
grammes provide a guide to
the choice of the most
suitable programme for your
laundry.
12