Zanussi FJE 1207 Kullanıcı Kılavuzu - Sayfa 23

Yıkayıcı Zanussi FJE 1207 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi FJE 1207 23 sayfaları. Zanussi washer user manual
Ayrıca Zanussi FJE 1207 için: Kullanıcı Kılavuzu (24 sayfalar)

Sayfayı Yazdır

Problem

• The door will not open:

• Spinning starts late or the

laundry is not spun enough:

If you are unable to identify or solve the problem,

contact our service centre. Before telephoning, make

a note of the model, serial number and purchase

date of your machine: the Service Centre will require

this information.

Possible cause

• The programme is still running, the drum is turning.

• The door lock has not yet released (door locked

light on).

• The water level is above the bottom edge of the door.

• The machine is heating the water.

• The electronic unbalance detection device has cut

in because the laundry is not evenly distributed in

the drum. The laundry is redistributed by reverse

rotation of the drum. This may happen several

times before the unbalance disappears and normal

spinning can resume. If, after few minutes, the

laundry is still not evenly distributed in the drum,

the machine will spin at a lower speed or will not

spin. If at the end of the programme the laundry is

not spun enough, redistribute the load manually

and select the spin programme.