Zanussi FJE 904 Talimat Kitapçığı - Sayfa 22

Yıkayıcı Zanussi FJE 904 için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Zanussi FJE 904 23 sayfaları. Washing machine fje 904 - fje 1204g

Sayfayı Yazdır

1. Something Not Working

132992150•FJE904•gb.qxd

02/04/03

Problem

• The door will not open:

• Spinning starts late or the

laundry is not spun enough:

• Water is not visible in the

machine:

• The machine makes an unusual

noise:

If you are unable to identify or solve the problem,

contact our service centre. Before telephoning, make

a note of the model, serial number and purchase

date of your machine: the Service Centre will require

this information.

P0042 BD

12:27

Pagina 22

(Nero/Process Black pellicola)

• The water level is above the bottom edge of the door.

• The machine is heating the water.

• The drum is turning.

The door can only be opened when the relevant

light has gone out.

• The electronic unbalance detection device has cut

• The machine, which is the result of modern

• The machine is fitted with a commutator motor

Possible cause

in because the laundry is not evenly distributed in

the drum. The laundry is redistributed by reverse

rotation of the drum. This may happen several

times before the unbalance disappears and normal

spinning can resume. If, after 5 minutes, the

laundry is still not evenly distributed in the drum,

the machine will spin at a lower speed. If at the end

of the programme the laundry is not spun enough,

redistribute the load manually and select the spin

programme.

technology, runs in a very economical way with low

water consumption. Performance is nevertheless

excellent.

which improves machine performance.