Zanussi FJS 1084 C Talimat Kitapçığı - Sayfa 21

Yıkayıcı Zanussi FJS 1084 C için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Zanussi FJS 1084 C 22 sayfaları. Washing machine fjs 1084 c
Ayrıca Zanussi FJS 1084 C için: Talimat Kitapçığı (21 sayfalar)

Sayfayı Yazdır

Problem

• The door will not open:

• Spinning starts late or the

machine does not spin:

• The machine makes an

unusual noise:

• No water is visible in the

drum:

• Unsatisfactory washing

results:

• Detergent residue is left after

the wash cycle:

• Foam remains after the last

rinse:

If you are unable to identify or solve the problem,

contact our service centre. Before telephoning,

make a note of the model, serial number and

purchase date of your machine: the Service Centre

will require this information.

Possible cause

• The programme is still running.

• The door lock has not been released.

• There is water in the drum.

• The electronic unbalance detection device has cut in

because the laundry is not evenly distributed in the

drum. The laundry is redistributed by reverse

rotation of the drum. This may happen several times

before the unbalance disappears and normal

spinning can resume. If, after 10 minutes, the

laundry is still not evenly distributed in the drum, the

machine will not spin. In this case, redistribute the

load manually and reselect the spin programme.

• The machine is fitted with a type of motor which

makes an unusual noise compared with other

traditional motors. This new motor ensures a

softer start and more even distribution of the

laundry in the drum when spinning, as well as

increased stability of the machine.

• Machines based on modern technology operate

very economically using very little water without

affecting performance.

• Too little detergent or unsuitable detergent has

been used.

• Stubborn stains have not been treated prior to

washing.

• The correct temperature or programme was not

selected.

• Excessive laundry load.

• This is most problaby due to non soluble

components contained in modern detergents. It is

not a sign of inadequate rinsing.

Brush or shake the garments and, if necessary,

wash them again.

• Modern detergents can produce foam even after

rinsing, but this will not affect the quality of the

wash.

Mod. ..........

Prod. No. ...........

Ser. No. .........

P0042