Zanussi FL 1008 Talimat Kitapçığı - Sayfa 17

Yıkayıcı Zanussi FL 1008 için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Zanussi FL 1008 24 sayfaları. Washing machine fl 808; fl1008
Ayrıca Zanussi FL 1008 için: Talimat Kitapçığı (22 sayfalar)

Sayfayı Yazdır

7. Select the DELAY START

Before you start the programme, if you wish the

starting to be delayed, press the DELAY START

button repeatedly, to select the desired delay. The

relevant light illuminates.

8. Start the programme

To start the selected programme, press the

START/PAUSE button; the corresponding light stops

flashing.

The PRELAVADO/LAVADO (Prewash/Wash) light

illuminates.

The machine starts operating.

If you have chosen a delayed start, the machine will

begin the countdown.

9. Altering a programme

You can alter the programme before it starts.

When the programme has started, you can only

reset it by turning the programme selector dial to O

and then you can select the new programme.

The washing water remains in the tub.

Start the new programme by depressing the

START/PAUSE button.

10. Interrupting a programme

Depress the START/PAUSE button to interrupt a

programme which is running, the corresponding light

starts to flash. Depress the button again to restart the

programme.

11. Cancelling a programme

Turn the selector dial to O to cancel a programme

which is running. Now you can select a new

programme.

12. Opening the door after the

programme has started

First set the machine to PAUSE by pressing the

START/PAUSE button.

If the door does not open in 2 minutes, this means

that the machine is already heating, that the water

level is above the bottom edge of the door or that the

drum is turning.

If you cannot open the door but you need to open it

you have to switch the machine off by turning the

selector dial to "O". After about 2 minutes the door can

be opened (pay attention to the water level and

temperature!).

13. At the end of the programme

The machine stops automatically.

The START-PAUSE pilot light goes out and the pilot

light FIN comes on. The door can be opened.

If the ANTI-ARRUGAS

has been selected, the phase light "FIN" (END) is on

and the door is locked to indicate that the water must

be emptied out before opening the door.

To do this first turn the programme selector dial to "O"

and then to drain programme

. The spin programme is performed at the

maximum speed. In order to avoid any creasing or

damage in synthetic, delicate and wool items, the

spin speed must be reduced by turning the spin

speed selector dial.

At the end of the programme turn the programme

selector dial to "O" to switch the machine off.

Remove the laundry from the drum and carefully

check that the drum is empty.

If you do not intend to carry out another wash, close

the water tap. Leave the door open to prevent the

formation of mildew and unpleasant smells.

(RINSE HOLD) option

or spin programme