Zanussi FL 608 Talimat Kitapçığı - Sayfa 10

Yıkayıcı Zanussi FL 608 için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Zanussi FL 608 22 sayfaları. Washing machine fl 608

Use

Control panel

1 Detergent dispenser Drawer
2 On/Off button
Press this button to start the machine. The same
button is used to switch the machine off.
Before selecting a programme or changing an
ongoing programme the machine must be
switched off by depressing the On/Off button.
3 Mains-on light
It comes on when the machine starts operating and
goes out by depressing ON/OFF button to switch the
machine off.
4 Quick wash button
By depressing this button on cotton and synthetics
programmes the washing time will be reduced by
approx. 30 mins for cotton from COLD
and by 15 mins for synthetics.
Max. recommended temperature 60°C.
To be used for lightly soiled laundry.
5 Extra rinse button
By depressing this button on programmes A-B for
cotton and linen the machine will perform 4 rinses
instead of 3.
To be used in areas where the water is very soft or
for people allergic to detergents or who have very
delicate skin.
6 Anti-crease button
Using this option the last rinse water is not emptied
out, so as to avoid creasing if the laundry is not
removed from the machine immediately after
washing.
The water can be emptied out by pressing the button
again (emptying will be followed by a spin) or by
selecting the drain programme "N".
If the button is not pressed, the programmes end
with a spin.
7 Temperature selector dial
(thermostat)
To select the washing temperature turn the dial to
the required value.
When your laundry is only lightly soiled, a cold wash
can be used (dial to position
to 60°C
8 Programme selector dial
To select the required washing programme turn the
dial clockwise.
10
).