Zanussi FL1001 Talimat Kitapçığı - Sayfa 19
Yıkayıcı Zanussi FL1001 için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Zanussi FL1001 27 sayfaları. Washing machine
Operating sequence
Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C, with
the machine empty, to remove any manufacturing
residue from the drum and tub. Pour half a measure
of detergent in the compartment
detergent drawer and start the machine.
Choosing the programme
There are 3 possibilities to select the
programme:
•
with the programme buttons
•
with the Memory buttons
•
with the special programmes
The setting of the programme is carried out as
indicated below.
Setting with the programme buttons
1. Load the laundry
Open the door.
Place the laundry in the drum, stretching every single
item.
If possible, wash together big and small items.
P0004
Close the door.
2. Measure out the detergent
Pull out the drawer from the control panel until it
stops. Pour the amount of detergent needed in the
washing compartment
If you choose the Prewash option, pour the detergent
also in the compartment
of the
.
.
3. Measure out the additive
Pour any liquid additives, to soften or starch the
laundry, in the compartment
Do not exceed the MAX level.
P0223
4. Switch the machine on
Press the ON/OFF button to switch the machine on;
the display will show three blinking dashes.
ON-OFF
CANCEL
5. Choose the desired programme
Press the FABRICS button until you choose the
desired programme/fabric; the corresponding light
will light up.
19
.
P0226