Zanussi ZWS 568 Kullanıcı Kılavuzu - Sayfa 21
Yıkayıcı Zanussi ZWS 568 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZWS 568 24 sayfaları. Front-loading washing machine
- 1. Table of Contents
- 2. Safety Information
- 3. Product Description
- 4. Control Panel
- 5. First Use
- 6. Daily Use
- 7. Helpful Hints and Tips
- 8. Washing Programmes
- 9. What to Do if
- 10. Technical Data
- 11. Consumption Values
- 12. Care and Cleaning
- 13. Installation
- 14. Electrical Connection
- 15. Environment Concerns
In this case, make sure the end cannot come unhooked
when the machine is emptying. This could be done by
tying it to the tap with a piece of string or attaching it
to the wall.
Electrical connection
Information on the electrical connection is given on the
rating plate on the inner edge of the appliance door.
Check that your domestic electrical installation can take
the maximum load required, also taking into account any
other appliances in use.
Caution! Connect the machine to an earthed socket.
Warning! The appliance is supplied with a 13amp
plug fitted. In the event of having to change the fuse
in the plug supplied, a 13amp ASTA approved (BS1363/
A) fuse must be used.
Environment concerns
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
Hooked over the edge of a
sink using the plastic hose
guide supplied with the
machine.
In a sink drain pipe branch . This branch must be above
the trap so that the bend is at least 60 cm above the
ground.
Directly into a drain pipe at a height of not less than 60
cm and not more than 90 cm. The end of the drain hose
must always be ventilated , i.e. the inside diameter of
the drain pipe must be larger than the outside diameter
of the drain hose. The drain hose must not be kinked.
Caution! The manufacturer does not accept any
responsibility for damage or injury through failure
to comply with the above safety precaution.
Caution! Should the appliance power supply cable
need to be replaced, this MUST be carried out by a
Service Centre.
The power supply cable must be easily accessible
after installing the machine.
information about recycling of this product, please
contact your local council, your household waste disposal
service or the shop where you purchased the product.
Packaging materials
The materials marked with the symbol
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
are recyclable.
21