Zanussi ZWS2125W Kullanıcı Kılavuzu - Sayfa 4

Yıkayıcı Zanussi ZWS2125W için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZWS2125W 29 sayfaları.

If you will not use your machine for a long time, unplug your machine,

close the water supply and leave the door open in order to keep the

inside of the machine dry and for prevention from unpleasant odour.

As a result of the quality control procedures, a certain amount of

water may remain in your machine. This is not harmful for your

machine.

SECTION 2: INSTALLATION

You must pay attention to the following issues before using your washing

machine.

Transportation screws, which are located at the back side of the

machine, must be removed before running the machine.

Loosen the screws by rotating counterclockwise by a suitable wrench.

(DIAGRAM-1)

Remove the screws by pulling them.(DIAGRAM-2)

To the holes where the transport screws have been removed, insert

the plastic transport screw taps found in the accessories bag.

(DIAGRAM-3)

The transportation screws, that have been removed from the machine

should be kept in hand for any other transportation necessities.

DIAGRAM-1

Do not install your machine on rugs or similar surfaces.

For your machine to work silently and without any vibration, it should

be settled on a flat, non-slippery and tough ground.

DIAGRAM-2

DIAGRAM-3