Zanussi DW 65 TCR Kullanım ve Bakım Talimatları - Sayfa 8
Bulaşık Makinesi Zanussi DW 65 TCR için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları indirin. Zanussi DW 65 TCR 32 sayfaları. Dishwasher
Ayrıca Zanussi DW 65 TCR için: Kullanım ve Bakım Kılavuzu (33 sayfalar), Kullanım ve Bakım Kılavuzu (32 sayfalar)
Sayfayı Yazdır
and replace the screws to fix the worktop
in place (see fig. 3).
Alternatively, if you prefer to install the
machine beneath an existing worktop, the
machine's integral worktop can be
removed merely by removing the front
securing screws as above, and releasing
the worktop from its rear catch. This
done, the dishwasher will fit into a recess
of the dimensions given in figure 3.
Important
Please ensure that when the appliance
is installed it is easily accessible for the
engineer in the event of a breakdown.
Building-in instructions
Fitting «decor panels»
To give the dishwasher a completely
«built-in» look, both the door and lower
panel can be covered with sheets of plastic
laminate (you must provide these yourself)
to match the doors of adjacent units.
To fit these «decor panels», start by
loosening the bottom panel's retaining
screws (see fig. 4) and freeing it from its top
catch. Make sure these screws are not
removed completely. Next, remove the
metal trim screwed to both the door and
lower panel, fit the covering sheets of
plastic laminate, and clamp them in position
by replacing the metal trims. Finally, hook
the lower panel onto its top catch and
retighten the lower retaining screws.
Please note: The decor panels should be
fitted before building the appliance in.