Zanussi ZDTS401 Kullanıcı Kılavuzu - Sayfa 10

Bulaşık Makinesi Zanussi ZDTS401 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZDTS401 20 sayfaları.

Adjusting the dosage of rinse aid

Load cutlery and dishes

Helpful hints and tips

Caution! Only use the appliance for household

utensils that are applicable for dishwashers.

Do not use the appliance to clean objects that can ab-

sorb water (sponges, household cloths, etc.).

• Before you load cutlery and dishes, do these steps:

– Remove all food remainings and debris.

– Make burnt, remaining food in pans soft.

• While you load cutlery and dishes, do these steps:

– Load hollow items (e.g. cups, glasses and pans)

with the opening down.

– Make sure that water does not collect in the con-

tainer or in a deep base.

– Make sure that cutlery and dishes do not lie inside

one another.

– Make sure that cutlery and dishes do not cover

other cutlery and dishes.

– Make sure that glasses do not touch other

glasses.

– Put small objects in the cutlery basket.

• Plastic items and pans with non-stick coatings can

keep water droplets. Plastic items do not dry as well

as porcelain and steel items.

• Put light items in the upper basket. Make sure that

the items do not move.

Caution! Make sure that the spray arms can

move freely before you start a washing

programme.

Warning! Always close the door after you load

or unload the appliance. An open door can be

dangerous.

The rinse aid dial is set at

the factory at position 4.

To increase or decrease

the dosage refer to 'What

to do if...'

Arrange service dishes

and large lids around the

edge of the lower basket.

The rows of prongs in the

lower basket can be flat

to load pots, pans and

bowls.