Zanussi ZDG 323 Talimat Kitapçığı - Sayfa 8

Hob Zanussi ZDG 323 için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Zanussi ZDG 323 13 sayfaları. Hobs zdg313

Building In

Fig. 8

Dimensions are given in millimetres

These hobs can be inserted in a built-in kitchen unit

whose depth is between 550 and 600 mm. The hobs

dimensions are shown in Fig. 8.

Installation and assembly

These hobs can be installed in a kitchen unit with an

opening for insertion whose dimensions are shown in

Fig. 9.

The edge of the cut out must have a minimum distance

from the rear wall of 55 mm.

If there are side walls, or sides of the furniture unit near

the hob, the cut out edges must have a minimum

distance of 100 mm.

Hanging forniture units or hoods must be placed at 650

mm minimum from the hob.

Carry out the building in of the hob as follows:

1. Put the relevant sealings, supplied with the hob,

on the edges of the cut out, taking care that the

sealings meet without overlapping;

2. place the hob in the cut out, taking care of its centring;

3. fix the hob with the relevant screws (Fig. 10). The

traction of the screws is able to trace the sealing, any

excess of which can then be easily removed.

If several 30cm hob are to be installed side by side

into the same cut out, an assembly kit including

a support side bracket and supplementary

sealings is available at our After Sales Centres.

The relevant installation instructions are supplied

within the kit package.

FO 0199

a) sealing

Fig. 9

Fig. 10