Zanussi ZES63 Kullanım Talimatları Kılavuzu - Sayfa 15

Hob Zanussi ZES63 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Zanussi ZES63 21 sayfaları. Electric hob

Installation

When the hob is first installed

Once the hob has been installed, it is

important to remove any protective

materials, which were put on in the factory.

The manufacturer will not accept liability,

should the above instructions or any of the

other safety instructions incorporated in

this book be ignored.

These cooktops are designed for fitting on

modular kitchen cabinets having a depth of

between 550 and 600 mm and suitable

characteristics.

Fitting the Hob into the worktop

The cooktop can be installed in a cabinet

having an opening of the dimensions given in Fig.

5. The opening for fitting must be at least 55 mm

from the back wall. Possible right or left side walls

higher than the cooktop must be at least 100 mm

from the opening in the top.

Fitting the hob to the worktop

Carry out the building in of the hob as follows:

1. Place the seals supplied with the hob on the

front edge of the cut out. Then, place them

at 11 mm from the side edges and at 10 mm

from the rear edge, as shown in the

diagram, taking care that the seals meet

without overlapping.

2. Place the hob in the cut out, taking care that

it is centred.

Dimensions are given in mm.

Fig. 5