Zanussi ZGF 640 IT Talimat Kitapçığı - Sayfa 20

Hob Zanussi ZGF 640 IT için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Zanussi ZGF 640 IT 28 sayfaları.

Fitting the Hob into the Worktop

Carry out the building in of the hob as follows:

• place the seals supplied with the

hob on the front edge of the cut

out. Then, place them at 11 mm

from the side edges and at 10 mm

from the rear edge, as shown in

the diagram, taking care that the

seals meet without overlapping.

• place the hob in the cut out, taking

care that it is centred;

• fix the hob with the relevant fixing

clamps, supplied with the

accessories bag, as shown in the

diagram. When the screws have

been tightened, the excess seal

can be removed.

The edge of the hob forms a double seal

which prevents the ingress of liquids.

Seal