Zanussi ZGF 681 Talimat Kitapçığı - Sayfa 4

Hob Zanussi ZGF 681 için çevrimiçi göz atın veya pdf Talimat Kitapçığı indirin. Zanussi ZGF 681 12 sayfaları. Zanussi cooktop user manual
Ayrıca Zanussi ZGF 681 için: Talimat Kitapçığı (12 sayfalar)

Sayfayı Yazdır

Operation

Hob Burners

To light a burner:

push in the relevant control knob and turn it

anticlockwise to maximum position;

upon ignition, keep the knob pushed down about 5

seconds. This will allow the "thermocouple" (Fig. 1 -

letter D) to be heated and the safety device to be

switched off, otherwise the gas supply would be

interrupted;

then adjust the flame as required.

If the burner does not ignite, turn the control knob to

zero, and try again.

To ensure maximum burner efficiency, you should only

use pots and pans with a flat bottom fitting the size of

the burner used (see table).

Burner

Large (double-crown)

Medium (semi-rapid)

Small (Auxiliary)

If you use a saucepan which is smaller than the

recommended size, the flame will spread beyond

the bottom of the vessel, causing the handle to

overheat.

As soon as a liquid starts boiling, turn down the

flame so that it will barely keep the liquid

simmering.

Take care when frying food in hot oil or fat, as

the overheated splashes could easily ignite.

If the control knobs become difficult to turn, please

contact your local Service Centre.

Using the Wok Stand

A wok stand is provided to enable you to use a round

bottomed wok on the hob. The wok stand must only be

used on the double crown burner, and should not be used

with any other type of wok or pan.

When fitting the wok stand, ensure the recesses in the

frame fit securely onto the bars of the pan supports, as

shown in the diagram.

All manuals and user guides at all-guides.com

minimum

maximum

diameter

180 mm.

260 mm.

120 mm.

220 mm.

80 mm.

160 mm.

A - Burner cap

B - Burner crown

C - Ignition electrode

D - Thermocouple

Fig. 1