Zanussi ZGNN642X Kullanıcı Kılavuzu - Sayfa 13

Hob Zanussi ZGNN642X için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZGNN642X 21 sayfaları.

Sayfayı Yazdır

Be very careful when you replace

the pan supports to prevent the

hob top from damage.

2. The enamel coating occasionally can have

rough edges, so be careful when you wash the

pan supports by hand and dry them. If

necessary, remove stubborn stains with a paste

cleaner.

3. After you clean the pan supports, make sure

that they are in correct positions.

4. For the burner to operate correctly, make sure

that the arms of the pan supports are aligned

with the centre of the burner.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.

WHAT TO DO IF...

Problem

There is no spark when you try

to activate the spark generator.

CLEANING THE HOB

•

Remove immediately: melted plastic, plastic

foil, sugar and food with sugar, otherwise, the

dirt can cause damage to the hob. Take care to

avoid burns.

•

Remove when the hob is sufficiently cool:

limescale rings, water rings, fat stains, shiny

metallic discoloration. Clean the hob with a

moist cloth and a non-abrasive detergent. After

cleaning, wipe the hob dry with a soft cloth.

•

To clean the enamelled parts, caps and crowns,

wash them with warm soapy water and dry them

carefully before you put them back on.

CLEANING THE SPARK PLUG

This feature is obtained through a ceramic ignition

candle with a metal electrode. Keep these

components well clean to prevent difficult lighting

and check that the burner crown holes are not

obstructed.

PERIODIC MAINTENANCE

Speak to your local Authorised Service Centre

periodically to check the conditions of the gas

supply pipe and the pressure adjuster, if fitted.

Possible cause

The hob is not connected to an

electrical supply or it is con-

nected incorrectly.

Remedy

Check if the hob is correctly

connected to the electrical

supply.