Zanussi ZGO76534 Kullanıcı Kılavuzu - Sayfa 10

Hob Zanussi ZGO76534 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Zanussi ZGO76534 16 sayfaları.
Ayrıca Zanussi ZGO76534 için: Kullanıcı Kılavuzu (48 sayfalar)

Sayfayı Yazdır

• Make sure you position the pan supports correctly after

cleaning.

• To make the burners work correctly, make sure that the

arms of the pan supports are in the centre of the burn-

er.

• Be very careful when you replace the pan supports to

prevent the hob top from damage.

After cleaning, dry the appliance with a soft cloth.

Removing the dirt:

– Remove immediately: melting plastic, plastic foil,

and food containing sugar.

– Stop the appliance and let it cool down before

you clean: limescale rings, water rings, fat stains,

shiny metallic discolorations. Use a special

cleaner applicable for surface of hob.

Clean the appliance with a damp cloth and some de-

tergent.

At the end rub the appliance dry with a clean cloth.

What to do if...

Problem

There is no spark when lighting the

gas

The flame is blow out immediately af-

ter ignition

The gas ring burns unevenly

between the rims of the burners and the frame (if

applicable).

hard or sharp objects fall onto the glass or hit the edge of

the hob.

Cleaning of the spark plug

This feature is obtained through a ceramic ignition candle

with a metal electrode. Keep these components well clean

to prevent difficult lighting and check that the burner

crown holes are not obstructed.

Periodic maintenance

Periodically speak your local Service Force Centre to

check the conditions of the gas supply pipe and the pres-

sure adjuster, if fitted.

Possible cause

• There is no electrical supply

• Burner cap and crown are placed

uneven

• Thermocouple is not heated suffi-

cient

• Burner crown is blocked with food

residues

Warning! Do not use knives, scrapers or similar

instruments to clean the surface of the glass or

Warning! Do not slide cookware over the glass

because it could scratch the surface. Also, do not let

• Make sure that the unit is connec-

ted and the electrical supply is

switched on.

• Control the fuse. If the fuse is re-

leased more than one time, refer

to a qualified electrician.

• Make sure that the burner cap and

crown are in correct positions.

• After lightning the flame, keep the

knob pushed for approximately 5

seconds.

• Make sure that the injector is not

blocked and the burner crown is

clear of food particles.

Remedy